Click To Call(727) 324-4247Click To Get A Free Estimate
Red clay brick paver walkway with a fresh seal in a Palm Harbor yard

Warm brick color that stays rich and even

Brick Paver Sealing in Palm Harbor, FL

Ask a local contractor to seal your Palm Harbor brick pavers, with a free estimate at (727) 324-4247.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(727) 324-4247
Brick pavers

Can brick pavers in Palm Harbor be sealed, and how fast is the reply?

A local contractor can seal brick pavers at your Palm Harbor, FL home, and a reply comes within one business day, usually sooner. Estimates are free, and a yes is never required. To begin, call (727) 324-4247.

Brick pavers fade in the sun, gray at the surface and show white bloom after storms. A thoughtful wash and the right sealer bring warmth back to the red and tan tones without gloss that looks plastic. Tell the contractor whether the bricks are clay or concrete, if you know, where the sun hits them most and what stains you have noticed, and ask for a free estimate.

Call (727) 324-4247

Is my brick paver clay or concrete, and does it matter?

It matters, because the two materials breathe differently. A Palm Harbor installer lists clay brick, concrete pavers and travertine among the materials it lays in the area, and a Tampa Bay company says brick often needs products formulated for clay materials. A sealer that suits concrete may not suit fired clay. To have a contractor identify yours, call (727) 324-4247.

A tell is the edge: concrete pavers are uniform and fade toward gray, while clay is fired and keeps its color deeper in the brick. Wikipedia reports 31,238 housing units in Palm Harbor, a mix of older and newer homes with all sorts of paving. Send a photo when you ask for a free estimate.

Close view of clay brick pavers with packed joints after sealing

What finish suits brick pavers, wet look or matte?

Many brick owners prefer a matte or low gloss look, and Unilock says brick pavers often suit it. A Palm Harbor company describes clear coat sealers as breathable water-based acrylics with a matte finish, and wet look sealers as semi-gloss acrylics that deepen color. A Tampa Bay company calls wet look its most requested finish. To see both on your brick, ask for a free estimate.

Gloss on red brick can read orange in full sun, so a test patch in morning and evening light is worth the wait. Ask for it in a spot that sees both. For another opinion, call (727) 324-4247.

Why choose us

Why does efflorescence show up on brick?

Efflorescence is a white film left when natural salts rise through the stone and the water leaves. Unilock says it typically clears in two to three months and can take up to a year, and that sealing before it clears can trap moisture and cause haze. A Tampa Bay company adds that saltwater pools can speed it up. If you see white bloom, call (727) 324-4247.

New brick should wait 60 to 90 days, per Unilock, before any coat. Give the install date when you ask for a free estimate.

How is brick cleaned before it is sealed?

Gently. A Palm Harbor company's chart lists brick pavers by a pool at 500 to 1000 PSI with a soft wash unit, which protects edges and sand. CM Pavers, a Pinellas County company, says stains, mildew and sand loss are dealt with before sealer goes on. Ask what pressure and what cleaner are planned, and ask for a free estimate.

After rinsing, the brick has to dry. Unilock says that takes a few hours in warm sun and about 24 hours in cool shade, and that skies should stay clear for 24 to 48 hours. Joint sand goes in once dry. For the order of work, call (727) 324-4247.

Pricing

What does brick paver sealing cost in Palm Harbor?

No page found for this site prices brick sealing on its own, so the table lists the published pieces that do exist. A Tampa Bay company's Palm Harbor page lists $1.00 to $1.75 per square foot for most jobs. Another Palm Harbor company lists wash, joint sand and seal at $1.50 to $2.50 per square foot. To price your brick, ask for a free estimate.

A Tampa Bay company notes that natural stone can cost slightly more than concrete or brick, and that minimum project charges run $500 to $1,000. Prices for brick often depend on how much old sealer and weed growth is present. Call (727) 324-4247 to talk through the line items.

Piece of the jobPublished figureWhere it comes from
Clean, sand and seal, per sq ft$1.50 to $2.50Another Palm Harbor company's page
Clean, sand and seal, 300 sq ft$300 to $525Tampa Bay company's Palm Harbor range
Clean, sand and seal, 600 sq ft$600 to $1,050Tampa Bay company's Palm Harbor range
Clean, sand and seal, 1,000 sq ft$1,000 to $1,750Tampa Bay company's Palm Harbor range
Small job minimum$500 to $1,000Tampa Bay company's cost guide

No source found gives a brick-only rate. The first row is another company's per square foot range, the next three multiply area by the Palm Harbor range, and the last is a stated minimum. Repairs and stripping of old sealer are usually extra.

Get a Free Estimate

Contractor spraying a clear coat across a brick paver courtyard

How long do brick pavers go between seal coats?

Most guidance says three to five years. Unilock says solvent-based sealers can last four to five years when maintained, a Tampa Bay company says driveways land closer to three, and a Palm Harbor company says every two to three. Brick in open sun leans short. To plan, call (727) 324-4247.

A covered entry can stretch longer, since a Tampa Bay company says covered patios last five years or more. Tell the contractor where the sun hits when you ask for a free estimate.

What color and look can I expect after sealing brick?

Expect the tones to deepen and the surface to look cleaner. A Palm Harbor installer says sealing can restore faded pavers, and a clay brick keeps its natural variation under a clear coat. Do not expect a changed color, since sealer enhances and does not repaint. To preview, ask for a free estimate.

Ask for a sample on a small section near an edge. Looking at it dry, then after a hose rinse, shows how it reads in daily life. Questions? Call (727) 324-4247.

Photos

What do sealed brick pavers look like around Palm Harbor?

Freshly sealed paver driveway in a Palm Harbor courtyard
Sealed paver pool deck in a Palm Harbor courtyard
Sealed paver patio behind the home in a Palm Harbor courtyard
Sealed paver walkway to a front door in a Palm Harbor courtyard
Close view of freshly sealed pavers in a Palm Harbor courtyard
Paver area with one cleaned half beside a dirty half in a Palm Harbor courtyard
Contractor cleaning pavers in a Palm Harbor courtyard
Contractor sealing or sanding pavers in a Palm Harbor courtyard
How it works

What is the process for sealing brick pavers?

The process has five steps, and each waits on the one before it. The contractor sets the day around the forecast. To schedule, call (727) 324-4247.

1. Identify the brick

Clay or concrete, age, old coats and problem spots are noted.

2. Soft wash

A low-pressure wash lifts dirt and algae, and stains are treated on a test spot first.

3. Dry and sand

The brick dries fully, then sand fills the joints.

4. Seal

A product suited to the brick goes on in thin, even coats.

5. Cure and walk it

You are told how long feet and furniture should stay off.

Questions

What do Palm Harbor homeowners ask about brick paver sealing?

How often should I seal pavers in Florida?

Three to five years is the common guidance from Unilock and from a Tampa Bay company. A Palm Harbor company says every two to three years. Clay brick under a roof overhang may go longer than brick in open sun. If water darkens the brick instead of beading, the coat is thin. To have yours checked, call (727) 324-4247.

How much does it cost to have your pavers sealed?

A Tampa Bay company's Palm Harbor page lists $1.00 to $1.75 per square foot for most jobs, and the company says the price rises with weeds, joint sand, old sealer and tint work. No source found prices brick on its own. A 600 square foot brick driveway at that rate is about $600 to $1,050. To get a real number, ask for a free estimate.

Is there a downside to sealing pavers?

Repeat cost and slickness are the downsides. A glossy coat can feel slippery when wet, and Unilock says brick pavers often look better in matte or low gloss. A coat put on before efflorescence has cleared can trap moisture and cloud. Waiting avoids that, and ask for a free estimate.

Should pavers be sealed in Florida?

Sealing is a choice and not a must. Unilock says pavers hold up without it, but a coat can deepen color, keep joint sand in place and guard against stains. A Palm Harbor paver installer says sealing protects against harsh Florida weather and can restore faded pavers. If yours look pale, call (727) 324-4247.

Can I clean, sand and seal my pavers?

A contractor can do all three in sequence, and the order matters. Wash, treat stains, let the brick dry, refill the joints, then seal. A Palm Harbor company says sealer needs a clean surface to bond. Ask for one price covering all three steps, and ask for a free estimate.

Which sealer is right for brick pavers in Florida?

A Tampa Bay company says clay brick often needs products formulated for clay materials, and Unilock says brick pavers often suit matte or low gloss. Breathable products let moisture out of the stone. Ask the contractor to name the product and why it fits clay. To raise the question, call (727) 324-4247.

Can brick pavers be pressure washed?

Yes, at low pressure and with care. A Palm Harbor company's chart lists 500 to 1000 PSI and a soft wash unit for brick pavers by a pool, and 3000 to 4000 PSI for driveways of interlocking pavers. Brick edges chip at high pressure, so ask what setting is planned. To discuss, ask for a free estimate.

Do brick pavers need sealer after they are installed?

Not right away. Unilock says to wait 60 to 90 days on new pavers so efflorescence can fade, and that it can take up to a year. Sealing too early can trap moisture. Give the install date when you call (727) 324-4247.

Does humid Palm Harbor weather affect brick paver sealing?

It does. Wikipedia lists about 52.7 inches of rain a year and 71.1 rainy days at a northern Pinellas County station and a rainy season of about May through October. Sealer needs 24 to 48 hours of clear skies, by Unilock's count, so a muggy wet stretch pushes a job back. Spring and fall are easier. To pick a date, ask for a free estimate.

Ready to bring the warmth back to your brick?

Share a photo or a short description. A local contractor replies inside one business day, often sooner, and the visit is free.

Call (727) 324-4247

Free, no obligation